Skip to content

Vapi vs Bland AI for building phone call agents

Vapi and Bland AI both build AI phone agents, but Vapi charges a low hosting fee and passes provider costs through at cost, while Bland bundles its own models into one higher per minute rate. PyAI publishes this Vapi vs Bland page and stays out of the capability table.

Prices checked October 2026·By Shaambhav Shankar

Vapi

4.2 G2, 3 reviews

Pay as you go platform, providers passed at cost.

$0.05/min hosting plus providers

Bland AI

5.0 G2, 11 reviews

One bundled rate using its own models.

$0.12 to $0.14/min, $0 to $299/mo

PyAI

No G2 profile yet

Voice infrastructure, its own engine, no platform fee.

$0.05/min Omni, Agents $0.08/min

Key takeaways

Vapi vs Bland AI in five lines

Pricing shape

Vapi charges $0.05/min hosting and passes STT, LLM and TTS through at cost, whereas Bland bundles its own models into $0.12 to $0.14/min with no provider line items.

Platform fee

Vapi starts pay as you go, with Core at $29 a month. Bland Start has no platform fee, while Bland Build adds $299 a month for higher limits.

Control

Vapi lets you pick Deepgram, OpenAI and ElevenLabs and swap them, while Bland runs its own stack so there is less to choose and less to tune.

Reviews

Bland scores 5.0 on G2 from 11 reviews and Vapi 4.2 from 3. Both samples are small, so read the scores as early signal rather than a verdict.

The shared trait

Both orchestrate models and add a platform layer on top. PyAI runs its own engine instead, so there is one vendor and no platform fee.

Which one fits

Pick your situation, get the honest answer

The Vapi, Bland and PyAI outcomes are all written out in plain text below, so none sit hidden behind the picker. Choose one option per row, and the result shows the first outcome matching all three choices.

What is not working today

Who builds it

Minutes a month

Best fit

Pick an option on the left

The answer updates as each option is chosen.

4Capabilities both state
7Where they diverge
2Worth a trial before choosing
See which option fits each scenario
  1. PyAI. Vapi and Bland both orchestrate third party models behind a platform layer, whereas PyAI runs its own speech recognition, voice and conversation engine. One vendor, one bill, no platform fee, at $0.05/min on Omni or $0.08/min on Agents newly launched.
  2. Bland. Bland bundles its own STT, LLM and TTS into one rate, so there is nothing to wire together and a single $0.12 to $0.14/min line on the bill.
  3. Vapi, if you track every line. Vapi hosting is $0.05/min, but provider pass-through for Deepgram, OpenAI and ElevenLabs stacks on top, so the all in figure needs its own estimate.
  4. Bland, for a predictable bill. A non technical team usually prefers the single bundled rate, since Bland has no provider line items to read or forecast.
  5. Vapi at volume, with care. Vapi hosting at $0.05/min plus providers at cost can land under Bland's $0.12 to $0.14/min, but only if you keep cheaper models selected.
  6. Either, test both. At low volume the monthly gap is small, so weigh Bland's $299 Build fee and Vapi's provider costs against the features each gives you.
  7. Bland for simplicity, Vapi for control. High volume developer teams split here: Bland removes the wiring, while Vapi keeps every provider swappable for tuning and price.
  8. Bland. For a non technical team, Bland's bundled models and published concurrency limits are easier to adopt than Vapi's provider setup.
  9. Vapi for flexibility, Bland for one rate. Vapi suits teams that want provider choice, whereas Bland suits teams that want a single number on the invoice.

Pricing

What each one costs, and what moves the number

Vapi, Bland and PyAI each publish a rate card. Vapi splits the bill into hosting plus providers, while Bland and PyAI quote one per minute figure. Rates read in October 2026.

Vapi

Vapi pricing page, October 2026.

Hosting$0.05/min

Plus providers at cost

Deepgram about $0.0099/min, OpenAI $0.0077 to $0.0452/min, ElevenLabs $0.0146 to $0.0238/min. Core plan $29/mo, Pro from $999/mo. HIPAA $2,000/mo. Extra concurrency $10/line.

$5 free credit, no credit card.

Bland AI

Bland pricing page, October 2026.

Start plan$0.14/min

Build plan $0.12/min

LLM, real time STT and premium TTS included, no token charges. Start has $0 platform fee and 10 concurrent calls. Build adds $299/mo and 50 concurrent. Transfer $0.04 to $0.05/min.

2 credits and an inbound number, no credit card.

PyAI

PyAI pricing page, October 2026.

AI voice per minute$0.05/min

No platform fee

Omni runs the full voice turn on its own engine. Agents cost $0.08/min. PyAI does not resell other models, so it is not a swap for a bring your own provider setup.

$50 free credit, no credit card.

Put the same questions to Vapi, Bland and PyAI: the all in cost per minute at your model mix, what the platform fee is at your volume, and whether telephony is billed on top.

Feature matrix

What each platform states it does

Each row records what the vendor publishes on its own pricing page, read in October 2026. A blank means not stated, never assumed absent. PyAI is left out because it runs its own engine rather than orchestrating these two.

Vapi and Bland AI compared on stated capability
CapabilityVapiBland AI
Usage billed by the minute, no plan needed✓✓
Bundled STT, LLM and TTS in one rateNot stated✓
Bring your own model providers✓Not stated
Provider pass-through at cost✓Not stated
No-code builder✓✓
$0 platform fee on the entry plan✓✓
HIPAA compliance option✓Not stated
Transfer minute pricing publishedNot stated✓
Use an existing carrier or SIP trunk✓✓
Concurrency add-ons priced✓Not stated
Published concurrency limits per planNot stated✓
Compare with PyAIBland pricing ↗

Deep dive

Where the two actually differ

Billing, control and evidence decide most Vapi vs Bland shortlists.

How the bill adds up

Vapi

$0.05/min hosting plus Deepgram, OpenAI and ElevenLabs at cost, so the total depends on your model mix.

Bland AI

$0.12 to $0.14/min all in, with LLM, STT and TTS bundled and no provider line items.

PyAI

$0.05/min on its own engine, Agents $0.08/min, no platform fee on top.

Control versus simplicity

Vapi

Swap each provider to tune quality and price. More knobs, more to maintain.

Bland AI

Runs its own stack, so fewer choices and a quicker start for a non technical team.

PyAI

One engine tuned for phone calls, with code or no-code paths.

Evidence base

Vapi

4.2 on G2 from 3 reviews, a very small sample.

Bland AI

5.0 on G2 from 11 reviews, also a small sample.

PyAI

No reviews yet. PyAI clocks about 390ms voice to voice in its own early benchmark.

What reviewers say

Ratings and reviewer sentiment

The Vapi and Bland ratings and tags were taken from G2 in October 2026. Both samples are small, 3 reviews for Vapi and 11 for Bland, so treat the ratings as early signal rather than a settled verdict. Ease of use is a shared theme on both, while the complaints cluster around setup and the learning curve on each.

Vapi

G2
4.2 (3)
Top praise
Ease of use
Top complaint
Hard to use

Praised for: ease of use, easy setup and integrations across the platform.

Criticized for: a hard interface, complexity and a learning curve, plus limited functionality in places.

The sample is only 3 reviews, so the split between easy and hard reflects a handful of users.

Read the profile G2

Compare with PyAI

Bland AI

G2
5.0 (11)
Top praise
Ease of use
Top complaint
Complex setup

Praised for: ease of use, features, a simple approach and easy integrations.

Criticized for: complex features, a complex setup and a learning curve on the harder flows.

All 11 reviews rate it 5.0, so the complaints sit inside otherwise positive writeups.

See Bland's reviews on G2

Bland pricing ↗

PyAI

G2
No profile yet
Own benchmark
~390ms voice to voice
Works with
Your own numbers
No user reviews yet. The same Vapi or Bland call script can run on a free PyAI sandbox key, which holds $50 of credit and asks for no credit card.
Get a sandbox key →

Decision table

If this is your situation, pick this

Read across the row.

If this is youPickWhy
A low entry per minuteVapi$0.05/min hosting plus providers at cost
Choice of STT, LLM and TTSVapiDeepgram, OpenAI, ElevenLabs passed at cost
One bundled rate, no add-upsBland$0.12 to $0.14/min includes the models
HIPAA coverage on the contractVapi$2,000/mo HIPAA listed
Published concurrency per planBland10 to 50 concurrent calls
Warm or cold transfer pricingBland$0.04 to $0.05 per transfer minute
Own engine, one vendor, no platform feePyAI$0.05/min Omni, Agents $0.08/mnewly launched
Call recording and scoring in the stackPyAITrace and Recap built in

Both fall short

What neither one does

Neither Vapi nor Bland runs its own full voice engine. Both orchestrate outside models behind a platform layer, so a platform fee or provider pass-through sits on top of the call. A stack such as PyAI runs the engine itself with one bill.

Neither

A vendor-owned engine with no platform layer

Capability rows record published claims, not test results.

Verdict

So which one should you buy?

Vapi suits teams that want provider choice and a low hosting fee, while Bland suits teams that want one bundled rate and less to wire. Three honest outcomes below.

Go Vapi

Vapi's own page states $0.05/min hosting, provider pass-through at cost and a HIPAA option at $2,000 a month.

Compare with PyAI

Go Bland

Bland's own page states $0.12 to $0.14/min with the models bundled and published concurrency on every plan.

Bland pricing ↗

Go PyAI

You want one engine and one bill with no platform fee. PyAI runs the voice at $0.05/min on Omni.

Get a sandbox key →

FAQ

Vapi vs Bland AI, common questions

Is Vapi or Bland AI cheaper?

Cost depends on your model mix. Vapi charges $0.05/min hosting plus STT, LLM and TTS at cost, so the total varies, while Bland bundles its own models into $0.12 to $0.14/min. At scale Vapi can land lower if you keep cheaper providers selected and skip the $299 Build fee.

Does Bland AI charge a platform fee?

Only on the Build plan. Bland Start has no platform fee and includes 10 concurrent calls, while Build adds $299 a month for 50 concurrent calls and higher daily limits. The per minute rate drops from $0.14 on Start to $0.12 on Build, so the fee pays back at volume.

Does Vapi mark up provider costs?

No. Vapi states that model providers pass through at cost with no markup, so you pay Deepgram, OpenAI and ElevenLabs their own rates plus the $0.05/min Vapi hosting fee. Pass-through pricing gives control over quality and price, but the all in cost needs its own estimate per call.

Which is better for a non technical team?

Bland, in most cases. Bland bundles its own models into one rate and publishes concurrency limits per plan, so there is less to wire and forecast. Vapi gives more provider choice but expects you to manage that setup, which suits a developer team more than a non technical one.

Do Vapi and Bland include telephony?

Not in the quoted rate. Both bill telephony separately through a carrier such as Twilio, and bring your own telephony is supported on each. Bland waives transfer fees on bring your own telephony, while Vapi lists its own SIP as free with carrier minutes charged at the provider's rate.

Is PyAI an alternative to Vapi and Bland?

Yes, with a different model. PyAI is voice infrastructure that runs its own engine, so it is not a platform that orchestrates other vendors' models. PyAI sends one bill and no platform fee, at $0.05/min on Omni or $0.08/min on Agents newly launched, with code or no-code paths.