PyAI vs Synthflow for no code voice agents
PyAI is voice infrastructure that runs its own engine and publishes a per minute rate, whereas Synthflow is a no code voice AI agent platform sold on an Enterprise plan from $30,000 a year. PyAI publishes this page and is one of the two products compared.
PyAI
No G2 profile yet
Developers and cost conscious teams.
$0.05/min Omni, Agents at $0.08/min, no platform fee
Synthflow
4.5 G2, 1,015 reviews
No code agencies and enterprise teams.
$30,000 a year minimum, per minute rate not stated
Key takeaways
PyAI vs Synthflow in five lines
Ratings
Synthflow scores 4.5 on G2 from 1,015 reviews, whereas PyAI has no G2 profile yet. A side by side test call on one script is a fairer check than Synthflow's 1,015 review lead.
Shape
PyAI is API first voice infrastructure that owns its speech recognition, voices, conversation engine and phone lines, sold per minute. Synthflow is a no code voice AI agent platform built around a visual Flow Designer and prebuilt CRM connectors.
Pricing
PyAI publishes $0.05/min on the Omni API or $0.08/min on Agents, plus $0.01/min for the phone line, with no platform fee. Synthflow publishes no per minute rate and sells an Enterprise plan that starts at $30,000 a year.
Latency
Omni measured about 390ms voice to voice with barge in on PyAI's own June 2026 benchmark. The 390ms figure is PyAI's own number and not an SLA, and Synthflow publishes no latency figure.
The gap
Synthflow is stronger for no code agencies that want native CRM and calendar syncs, while PyAI is stronger where a published rate and self serve signup matter.
Which one fits
Pick your situation, get the honest answer
Every outcome below is also written out in plain text underneath, so nothing here is hidden behind the picker. Pick one option from each row. The answer reads the first outcome that matches all three, and three of the nine outcomes point to Synthflow.
What is not working today
Who builds the agent
Yearly budget
Best fit
Pick an option on the left
The answer updates as each option is chosen.
See which option fits each scenario
- Synthflow. Synthflow ships prebuilt CRM and calendar connectors for HubSpot, GoHighLevel and Cal.com, plus CCaaS links to Cisco, Avaya and Genesys. PyAI does not state these integrations and expects a webhook.
- Synthflow. Ops staff build calls in the visual Flow Designer, and the 4.5 G2 score from 1,015 reviews shows a lot of non engineers run it in production. PyAI Agents has a no code builder and newly launched.
- PyAI. Synthflow's entry is an Enterprise plan from $30,000 a year, while PyAI is self serve with $50 of free credit and no credit card, at $0.05 to $0.08 a minute, so a small team can start for the price of the minutes it uses.
- PyAI. PyAI publishes $0.05 to $0.08 a minute on its own pricing page, whereas Synthflow publishes no per minute rate, so the real bill is only known after a sales quote on the Enterprise plan.
- PyAI. Developers get a published rate and a live API in minutes with a sandbox key, while new Synthflow accounts are routed through sales before a number is known.
- Either one, test both. PyAI Agents newly launched and Synthflow's Flow Designer both build call flows without code. Build the same call in each and compare the handling before committing a budget.
- PyAI. A one person team gets the no code Agents build newly launched and pays only for the minutes used, whereas Synthflow's Enterprise floor of $30,000 a year is hard to justify at low volume.
- Synthflow, if the sync must be prebuilt. A high volume agency tied to HubSpot or GoHighLevel saves build time with Synthflow's ready connectors. A team happy to wire a webhook keeps PyAI's published per minute rate instead.
- PyAI, on cost transparency. PyAI publishes a per minute rate and charges no platform fee, whereas Synthflow starts at $30,000 a year on Enterprise with no public per minute rate to compare against.
Pricing
What each one costs, and what moves the number
PyAI publishes a rate card. Synthflow pricing is scoped per account, so the number comes from a sales call.
PyAI
PyAI pricing page, October 2026.
No platform fee
Omni API bills $0.05/min, Agents $0.08/min and the phone line $0.01/min, with no annual contract. Add ons such as Trace call scoring at $0.12/call are billed only when on.
$50 free credit, no credit card.
Synthflow
Synthflow pricing page, October 2026.
Per minute rate not stated
The page lists one plan. The final figure is scoped around call volume, concurrency, telephony setup, integrations and security, so no public per minute number is given.
No self serve tier shown on the pricing page.
Cost at the same call volume
PyAI Agents
$720
Synthflow
Not published
Feature matrix
What each one states it does
Each row records what the vendor publishes about itself on its own site, read in October 2026. A blank means not stated, never assumed absent.
| Capability | PyAI | Synthflow |
|---|---|---|
| Speech recognition, voice and AI reply from one vendor | ✓ | ✓ |
| Managed phone numbers | ✓ | ✓ |
| No code visual builder | ✓ New | ✓ Flow Designer |
| Published per minute rate | ✓ | Not stated |
| Start on a self serve account, no sales call needed | ✓ | Not stated |
| Answering machine detection | ✓ | Not stated |
| Prebuilt CRM and calendar syncs | Not stated | ✓ HubSpot, GoHighLevel, Cal.com |
| Contact center connectors | Not stated | ✓ Cisco, Avaya, Genesys |
| Live transfer to a person | ✓ | ✓ |
| Voice cloning | ✓ | Not stated |
| HIPAA | ✓ Enterprise | ✓ Enterprise |
| Get a sandbox key → | Synthflow pricing ↗ |
Deep dive
Where the two actually differ
Product scope, evidence and reviewer complaints separate PyAI from Synthflow.
Scope of the product
PyAI
States 9 of the 11 capabilities, including a published rate, self serve signup and voicemail detection. Synthflow does not state prebuilt CRM or contact center connectors.
Synthflow
States 7 of the 11, strongest on prebuilt CRM, calendar and CCaaS connectors, but it does not publish a per minute rate or self serve signup.
Evidence base
PyAI
No third party reviews yet. Speed figures are PyAI's own June 2026 benchmark, about 390ms voice to voice, not a third party test.
Synthflow
4.5 out of 5 from 1,015 reviews on G2. Capterra lists it as Synthflow AI Receptionist with no reviews counted there.
What reviewers complain about
PyAI
No reviews yet. Known gaps it states plainly: no self hosting, Agents newly launched, and no SOC 2 report.
Synthflow
G2 reviewers flag cost and cost limits, a learning curve, missing features and limited customization, alongside praise for easy setup.
What reviewers say
Ratings and reviewer sentiment
Scores and tag themes read from each vendor's own profile and the G2 and Capterra listings in October 2026.
Decision table
If this is your situation, pick this
Read across the row.
| If this is you | Pick | Why |
|---|---|---|
| You need a per minute price before any sales call | PyAI | $0.05 to $0.08/min on the page. Synthflow states none |
| Ops staff need a visual no code builder | Synthflow | Flow Designer, with a 4.5 G2 score from 1,015 reviews |
| Agents must sync to HubSpot, GoHighLevel or Cal.com | Synthflow | Prebuilt CRM and calendar connectors |
| You are a small team on a tight budget | PyAI | Self serve, $50 credit, no $30,000 a year floor |
| Outbound lists hit voicemail often | PyAI | PyAI states AMD. Synthflow's site does not list it |
| You run a contact center on Cisco or Genesys | Synthflow | Synthflow states CCaaS connectors. PyAI does not |
| Phone line inside a published flat rate | Neither | PyAI adds $0.01/min. Synthflow folds telephony into the quote |
Both fall short
What neither one does
Neither PyAI nor Synthflow puts the phone line inside one flat published rate, and both keep HIPAA on Enterprise. PyAI has no large public review base yet, and Synthflow publishes no per minute rate, so a test call on the same script carries more weight than either data point alone.
Neither
Phone line in a flat rate
Neither
HIPAA below Enterprise
Neither
A one click agent import
Capability rows record published claims, not test results.
Verdict
So which one should you buy?
PyAI is voice infrastructure with a published rate, while Synthflow is a no code voice AI agent platform with prebuilt integrations. Three honest outcomes below, including the one where neither one is right.
Go PyAI
PyAI publishes $0.05 to $0.08 a minute, self serve signup with $50 of credit and no credit card, plus voicemail detection and call scoring on any account. Run a test call against Synthflow on the same script.
Get a sandbox key →Go Synthflow
Synthflow's visual Flow Designer, prebuilt CRM and calendar syncs for HubSpot, GoHighLevel and Cal.com, CCaaS connectors and a 4.5 G2 score from 1,015 reviews make it stronger for no code agencies. The Enterprise plan starts at $30,000 a year.
Synthflow pricing ↗FAQ
PyAI vs Synthflow, common questions
Is PyAI cheaper than Synthflow?
PyAI publishes $0.05/min on the Omni API or $0.08/min on Agents, with no platform fee, whereas Synthflow publishes no per minute rate and sells an Enterprise plan from $30,000 a year. For a small or mid sized team, PyAI starts for the price of the minutes it uses.
What is the difference between PyAI and Synthflow?
PyAI is voice infrastructure that runs speech recognition, voices, the conversation engine and phone lines through one API at $0.05/min on Omni. Synthflow is a no code voice AI agent builder centered on a visual Flow Designer and prebuilt CRM, calendar and contact center connectors, sold on Enterprise.
Does Synthflow publish a per minute price?
No. Synthflow lists one Enterprise plan that starts at $30,000 a year and states the final figure is scoped around call volume, concurrency, telephony and integrations. No per minute rate appears on its pricing page, so PyAI marks it Not stated and shows its own $0.05 to $0.08 a minute instead.
Is PyAI or Synthflow better for a no code agency?
Synthflow is stronger for no code agencies, since its visual Flow Designer, prebuilt HubSpot, GoHighLevel and Cal.com syncs and 4.5 G2 score from 1,015 reviews suit non engineers. PyAI Agents has a no code builder too, and newly launched and states no native CRM syncs.
Do PyAI and Synthflow need developers?
Both can be run without deep engineering. Synthflow is built for no code teams through its Flow Designer, while PyAI offers a published API for developers and a no code Agents builder newly launched. One test call built on each, using PyAI's $50 free credit, shows which fits your team.
Can Synthflow agents move to PyAI?
Yes, but each Synthflow flow is rebuilt by hand, with no one click import. Teams move the Flow Designer prompt, knowledge and tools into PyAI Agents or the Omni API, buy PyAI numbers or keep their current phone provider, then run side by side test calls on a free sandbox key.