Skip to content

PyAI vs Telnyx for voice AI on phone calls

PyAI is voice infrastructure, the AI voice layer that runs on a phone call, whereas Telnyx is a cloud telephony carrier with its own global network that also ships voice AI agents. PyAI publishes this page and is one of the two products compared. PyAI is not a carrier and does not run its own phone network.

Prices checked October 2026·By Shaambhav Shankar

PyAI

No G2 profile yet

Teams that want the AI voice layer, all in per minute.

$0.05/min whole call, no platform fee

Telnyx

4.7 G2, 528 reviews

Teams that want a carrier, numbers and messaging in one account.

$0.05/min voice AI agent, plus LLM and the line

Key takeaways

PyAI vs Telnyx in five lines

Ratings

Telnyx CPaaS scores 4.7 on G2 from 528 reviews, whereas PyAI has no G2 profile yet. A test call with the same script on both is the fairer check before either number decides it.

Shape

Telnyx is a carrier with its own IP network, SIP trunks, numbers in many countries and SMS, and it adds voice AI agents. PyAI is the AI voice layer and runs on Telnyx numbers or PyAI's own at $0.01/min.

Pricing

Both sit at $0.05/min for the voice layer. PyAI's $0.05/min Omni rate runs the whole call including the reply engine, while Telnyx's $0.05/min covers speech to text, text to speech and orchestration, with LLM tokens and the phone line billed separately.

Latency

PyAI's own June 2026 benchmark puts Omni at about 390ms voice to voice, not an SLA, while Telnyx states agent response times under 200ms. The two numbers measure different points, so a side by side test call matters more.

The gap

PyAI is not a carrier and has no SOC 2 yet, whereas Telnyx is SOC 2, HIPAA and PCI and owns the network. Neither one puts LLM, the line and the voice work under one fixed rate without a caveat.

Which one fits

Pick your situation, get the honest answer

Every outcome below is also written out in plain text underneath, so nothing here is hidden behind the picker. Pick one option from each row. The answer reads the first outcome that matches all three, and three of the nine outcomes point to Telnyx.

What is not working today

Who builds the agent

Calls a month

Best fit

Pick an option on the left

The answer updates as each option is chosen.

$0.05PyAI Omni per min
$0.05Telnyx agent per min
11Capabilities compared
See which option fits each scenario
  1. Telnyx. Telnyx owns the IP network and sells elastic SIP trunks from $0.005/min outbound with a $0 platform fee. PyAI is not a carrier and buys or rides phone lines rather than running its own.
  2. Telnyx. Telnyx adds SMS and MMS to a number for $0.10/mo and bills messages per segment. PyAI focuses on the voice call and does not state SMS or MMS.
  3. PyAI. For outbound lists on Telnyx or PyAI numbers, PyAI AMD spots voicemail before a paid minute starts, and the first 5,000 answered calls each month are checked free. Telnyx does not state answering machine detection on its pricing.
  4. PyAI. PyAI Omni is $0.05/min for the whole call, plus $0.01/min for the line, with no platform fee. At 1,000 minutes that is about $60 all in, with no LLM token line to forecast.
  5. PyAI. At 20,000 minutes a month PyAI Omni is about $1,200 at $0.05/min + $0.01 telephony, and the reply engine is inside that rate, so there is no separate LLM token bill to model as volume grows.
  6. PyAI Agents. Ops staff set up the agent in the no code builder, newly launched, and AMD still skips voicemails before a paid minute is spent at $0.004 a checked call.
  7. Telnyx, if the carrier must be in house. Developers sending high volumes who also want to own trunks, numbers and routing keep all of it in Telnyx. Teams that only need the AI voice layer pay $0.05/min on PyAI and can ride Telnyx numbers.
  8. Either one, test both. PyAI has the Agents builder newly launched and Telnyx has its agent console. Build the same call in each before committing and compare by ear.
  9. PyAI, on the voice layer. PyAI runs the whole call at $0.05/min with the reply engine included and no platform fee, and it can run on Telnyx numbers or PyAI's own at $0.01/min.

Pricing

What each one costs, and what moves the number

Both publish a rate card. Telnyx splits the voice agent rate from LLM tokens and the phone line.

PyAI

PyAI pricing page, October 2026.

Per minute$0.05/min

No platform fee

Omni $0.05/min runs the whole call including the reply engine. Add the line at $0.01/min, or ride Telnyx numbers. Optional add ons such as AMD bill only on the calls that use them.

$50 free credit, no credit card.

Telnyx

Telnyx pricing pages, October 2026.

Voice AI agent plus parts$0.05/min

$0 platform fee

$0.05/min covers speech to text, text to speech and orchestration. LLM tokens, SIP from $0.005/min outbound and numbers from $1/mo come on top.

Numbers from $1/mo, SMS add on $0.10/mo.

Cost at the same call volume

PyAI Omni

$540

Telnyx agent

$495

Ask both: what the LLM tokens add on Telnyx, what the phone line costs on each, and which features sit behind a carrier contract.

Feature matrix

What each one states it does

Each row records what the vendor publishes about itself on its own site, read in October 2026. A blank means not stated, never assumed absent.

PyAI vs Telnyx compared on stated capability
CapabilityPyAITelnyx
Speech recognition, voice and reply priced in one minute rate✓ Whole call✓ LLM extra
Own carrier network and SIP trunkingNot a carrier✓
Managed phone numbers✓ US, Canada, India✓ Many countries
Answering machine detection with a free tier✓ First 5,000 freeNot stated
SMS and MMS messagingNot stated✓
A voice to voice latency number on the vendor site✓ ~390ms own test✓ Under 200ms stated
Voice cloning✓ FreeNot stated
STIR/SHAKEN attestationNot stated✓
Zero platform fee on the rate card✓✓
SOC 2, HIPAA and PCINot yet SOC 2✓
Runs on the other vendor's numbers✓ Incl. Telnyx✓ Bring your own
Get a sandbox key →Telnyx pricing ↗

Deep dive

Where the two actually differ

Carrier versus voice layer, rate structure and evidence base decide PyAI against Telnyx.

Carrier versus voice layer

PyAI

Runs the AI voice layer and rides a phone line at $0.01/min, including Telnyx numbers. PyAI is not a carrier, therefore it leans on a network it does not own.

Telnyx

Owns the IP network, the SIP trunks and the numbers, so routing, compliance and the line all sit in one account with a $0 platform fee.

How the per minute rate is built

PyAI

The $0.05/min Omni rate runs the whole call, reply engine included, so the only extra is the $0.01/min line. One number forecasts the voice cost.

Telnyx

The $0.05/min agent rate covers speech to text, text to speech and orchestration, whereas LLM tokens and the line are billed on top and move with model choice.

Evidence base

PyAI

No third party reviews yet. The speed figure is PyAI's own June 2026 benchmark, about 390ms voice to voice, and it is not an SLA.

Telnyx

4.7 out of 5 from 528 reviews on G2 for the CPaaS product. Reviewers praise support and setup and flag complex advanced configuration and cost at scale.

What reviewers say

Ratings and reviewer sentiment

Scores and theme tags read from the G2 profile in October 2026. No named quotes are shown because none were sourced by hand, so the block carries scores and themes only.

PyAI

G2
No profile yet
Capterra
No profile yet
Own benchmark
~390ms voice to voice
No user reviews yet. A free sandbox key with $50 of credit and no credit card runs the same call script on PyAI and Telnyx, so a team can compare by ear before paying.
Get a sandbox key →

Telnyx

G2 (CPaaS)
4.7 (528)
Capterra
No profile read
Reviewer base
Mostly small business

Praised for: customer support, ease of use, easy setup, easy integration, and documentation that helps onboarding.

Criticized for: complex processes on advanced configuration, cost at scale, and support for smaller accounts.

Read the profile G2

Decision table

If this is your situation, pick this

Read across the row.

If this is youPickWhy
You want the voice bill as one numberPyAI$0.05/min whole call, reply engine in the rate
Outbound lists hit voicemail oftenPyAIAMD at $0.004 a call after 5,000 free answered calls a month
You want to own trunks, routing and numbersTelnyxCarrier with its own network, SIP from $0.005/min
SMS and MMS in the same accountTelnyxMessaging add on from $0.10/mo per number
You need SOC 2, HIPAA and PCI todayTelnyxTelnyx states all three. PyAI cannot show a SOC 2 report yet
You keep Telnyx numbers but want the AI layerPyAIPyAI runs on Telnyx numbers at $0.05/min
One fixed rate for voice, line and LLMNeitherPyAI adds the $0.01 line, Telnyx bills LLM and line apart

Both fall short

What neither one does

Neither PyAI nor Telnyx puts the voice work, the LLM and the phone line under one fixed rate with no caveat. PyAI adds the $0.01/min line and has no SOC 2 yet, while Telnyx bills LLM tokens and the line apart from the $0.05/min agent. PyAI is not a carrier, so it does not replace the network Telnyx owns.

Neither

Voice, LLM and line in one rate

PyAI

Lacks SOC 2 today, and Agents is newly launched

Telnyx

LLM tokens billed on top

Capability rows record published claims, not test results.

Verdict

So which one should you buy?

PyAI is the AI voice layer on a call, while Telnyx is the carrier that also sells voice AI agents. Three honest outcomes below, including the one where neither one is right.

Go PyAI

PyAI lists the whole call at $0.05/min with the reply engine included, voicemail detection with a free tier and no platform fee, and it runs on Telnyx numbers. Run a test call against Telnyx on the same script.

Get a sandbox key →

Go Telnyx

Telnyx lists a carrier network, SIP trunks from $0.005/min, numbers in many countries, SMS and MMS, STIR/SHAKEN and SOC 2, HIPAA and PCI, with 528 G2 reviews behind it.

Telnyx pricing ↗

FAQ

PyAI vs Telnyx, common questions

Is PyAI cheaper than Telnyx?

Both charge $0.05/min for the voice layer, so neither is clearly cheaper on that line. PyAI's $0.05/min runs the whole call with the reply engine inside it, while Telnyx bills LLM tokens and the phone line on top of its $0.05/min agent rate. Run the same call on each.

What is the difference between PyAI and Telnyx?

PyAI is the AI voice layer that runs a phone call at $0.05/min with speech recognition, voices and the reply engine in one rate. Telnyx is a cloud telephony carrier that owns its network, SIP trunks, numbers and messaging, and also sells voice AI agents. PyAI is not a carrier.

Is PyAI or Telnyx better for AI voice agents?

PyAI suits teams that want the voice bill as one number, since its $0.05/min runs the whole call and AMD checks the first 5,000 answered calls free. Telnyx suits teams that also want the carrier, numbers and SMS in one account, whereas its agent rate adds LLM tokens and the line.

Can PyAI run on Telnyx numbers?

Yes. PyAI is the AI voice layer, so it can run on Telnyx numbers and SIP trunks or on PyAI's own numbers at $0.01/min for the line. Teams that already own Telnyx numbers keep their carrier, routing and compliance and point the call at PyAI for the voice work at $0.05/min.

Does PyAI replace Telnyx?

Not fully. PyAI is not a carrier and does not run its own phone network, so it does not replace the SIP trunks, global numbers and messaging Telnyx owns. PyAI replaces the voice AI agent on the call at $0.05/min and can sit on top of Telnyx numbers for the carrier side.

Can Telnyx voice AI agents move to PyAI?

Yes, though each agent is rebuilt by hand, since Telnyx offers no one click move to PyAI. Teams copy the agent prompt, tools and knowledge into PyAI Agents or the Omni API, then keep their Telnyx numbers or buy PyAI numbers at $0.01/min, and run test calls side by side with a free sandbox key and $50 credit.