Skip to content
Voice AI, built for real voices

Japanese AI Voice Agent for Phone Calls

Japanese that holds keigo through the whole call, reads mixed kanji and katakana correctly and says phone numbers in clear groups.

PyAI Agents runs Japanese conversations with about 390ms voice to voice, scores 94.3 out of 100 on the voice agent quality index, and costs $0.08 a minute with no monthly fee.

Explore first. Get a sandbox key when you are ready to build.

PyAI in motionInteractive example
Voices your Japanese agent can use

Natural Japanese voices for greetings, bookings, transfers and reminders on live calls.

日本語Tokyo standardKanji and kanaMale and femaleAnime and VTubers

215 characters left

3 free trials left

0:00

Build the agent

A Japanese voice agent in three parts

Write instructions, add your knowledge base and connect tools so the Japanese agent can book, look up and route calls.

  • Fix the keigo level in the system prompt
  • Add a reading check for kanji names
  • Link the reservation system for ryokan stays
Get a sandbox key →No credit card required.

On every call

One session from hello to summary

The same PyAI stack handles each step:

  1. ListenHear transcribes
  2. DecideOmni reasons
  3. ActYour tools run
  4. SpeakThe voice replies
  5. ReviewTrace and Recap
Get a sandbox key →One API, one bill.

Three steps to a Japanese agent that keeps keigo

InstructionsAgent prompt

Write the prompt with teineigo as the floor, sonkeigo for the caller…

No drop to casual formOn

01Set the politeness level first

Write the prompt with teineigo as the floor, sonkeigo for the caller and kenjōgo for your company. Keep it from greeting to closing.

  • No drop to casual form
  • Closing phrase stays humble
SandboxReading confirmed
☎ Test call0:12
Test call, not billed

02Test kanji names and phone numbers

Ask testers to give names written in kanji and numbers like 03 and 0120. The agent should confirm readings when unsure.

  • Reading confirmed
  • Grouped phone numbers
InstructionsAgent prompt

Japanese callers add short sounds while listening. Test that the…

Aizuchi not treated as…On

03Tune pauses for aizuchi

Japanese callers add short sounds while listening. Test that the agent waits and does not cut them off.

  • Aizuchi not treated as interruption
  • Natural turn length

Hear Japanese voice samples your agent can use

Standard Japanese follows Tokyo speech and uses pitch accent, so 橋 (bridge) and 箸 (chopsticks) are both read hashi but differ in pitch. Kansai speech uses other pitch patterns, so pick the voice that suits the audience.

Contact center

Contact center overflow

Take peak and after-hours calls in polite Japanese while staff shortages stretch Tokyo and Osaka teams, then hand hard cases over with a Recap summary.

Call handling
Live transfer
Add-on
Recap
Booking

Clinic and salon booking

Book, change and confirm clinic and salon appointments, using the right keigo level and reading the date, time and number of people back in full.

Call handling
Calendar tools
Add-on
Trace
Hotels

Hotels and ryokan

Handle ryokan reservations, check-in times and station access questions around the clock, in Japanese for local guests and English for visitors.

Call handling
Japanese and English
Add-on
24/7
Real estate

Tokyo real estate leads

Call back property inquiries within minutes, confirm the preferred ward, budget and move-in month, then book a viewing with an agent.

Call handling
Outbound
Add-on
AMD
Mail order

Mail order and e-commerce

Check order status, delivery slots and return requests from your own system before answering, so callers hear real details instead of a promise to follow up.

Call handling
Server tools
Add-on
Hosted tools
B2B

Lead qualification

Ask company size, budget and timing in formal business Japanese, then score each call in Trace and send qualified leads to the sales team.

Call handling
Trace scoring
Add-on
Whisper

Japanese calls an agent can carry

The same voice fits across content, calls, apps and phone lines. These are the places teams reach for it most.

Japanese AI voice agent on PyAI

A Japanese AI voice agent hears a caller in Japanese, decides on the next step and speaks the answer back in natural Japanese. PyAI Agents supports Japanese live today on the same voice infrastructure as Hear, Speak and Omni, all reached through one API. Business calls in Japan depend on keigo, the honorific system, so the agent must stay polite and humble from greeting to closing. Written Japanese mixes kanji, hiragana and katakana, which makes reading names, addresses and product codes aloud a real test. PyAI replies in about 390ms median voice to voice. PyAI does not offer on premises hosting for a Japanese agent. Unlike a touch tone phone menu, a Japanese voice agent follows normal speech, handles interruptions and takes action instead of reading a list of options. For Japanese audio files, see Japanese text to speech.

Japanese lines to hear before you build

Short Japanese lines that show how the voice sounds. Click a line to try it in PyAI.

PyAI features for Japanese contact centers and ryokan

390ms replies that respect aizuchi

Fast replies matter, but so does waiting through hai and ee.

The agent replies in about 390ms and handles real barge in apart from listening sounds.

390msBarge in

Tools for clinic and salon booking

Salons in Osaka book slots through your calendar during the call.

Webhooks confirm the date and counter, such as two people or three nights.

WebhooksCounters

Overflow for contact centers

When queues fill up, the agent takes the call in polite Japanese.

Live transfer with whisper sends hard cases to staff with context.

OverflowWhisper

Omni at $0.05 per minute

Mail order teams running high volume can use Omni at $0.05 per minute.

Telephony adds $0.01, so the total stays low for long order calls.

$0.05/min OmniHigh volume

Trace for keigo review

Supervisors check transcripts in Trace for any slip in politeness.

Recap turns each lead call into a short summary for Tokyo sales teams.

TraceRecap

Reminder calls that skip voicemail

Clinics in Tokyo can call patients the day before each visit.

AMD detects answering machines, so the agent speaks only to people and each confirmed or moved slot shows up in Trace.

AMDOutbound

Japanese AI voice agent pricing

Every rate is per minute with no monthly fee. Packaged voice agent platforms such as Retell AI run about $0.07 to $0.31 a minute, while a Japanese agent on PyAI is a flat $0.08 a minute with no monthly fee. Full rates are on the PyAI pricing page. Prices checked on pyai.com and retellai.com, October 2026.

PyAI · Japanese voice

Japanese AI voice agent pricing
PyAI Agents$0.08/min, no monthly fee
Omni for developers$0.05/min
PyAI phone number$0.01/min, or bring your own
Voicemail detection$0.004/call, first 5,000 free
Free credit at signup$50, no credit card

Billed per minute of call time.

One minute of a voice agent call, PyAI vs ElevenLabs

OptionPer minuteWhat it covers
PyAI Omni$0.05Listening, reasoning and voice, 38% less per minute
PyAI Agents$0.08Hosted agent with tools, no monthly fee
ElevenLabs Agents$0.08Call minutes, with LLM usage billed on top

ElevenLabs Agents lists $0.08 a minute for call minutes and bills LLM usage separately, so a full ElevenLabs minute costs more than $0.08. ElevenLabs prices checked on elevenlabs.io/pricing/agents, November 2026. A PyAI phone number adds $0.01 a minute.

Build a Japanese voice agent from your own code

Everything the Japanese agent does is one PyAI Agents session away, three ways in. Full docs: PyAI SDKs.

SDK

Build a Japanese AI voice agent with the Python or JavaScript SDK and one session call puts a Japanese agent on live Japanese calls.

Audio streams both ways while the caller speaks, so live Japanese calls feel natural.

pip install pyai

MCP

Let an assistant launch the Japanese agent through the PyAI MCP server, so Japanese conversations starts from a chat.

The assistant reuses your account and the same Japanese agent you run through the API.

CLI

Place a Japanese test call from the shell and watch the transcript, which speeds up Japanese test calls.

The Japanese agent CLI reuses the SDK keys, so a terminal test needs no new setup.

pyai agents start

Japanese AI voice agent FAQ

Quick answers about building and running a Japanese voice agent.

Does PyAI Agents support Japanese?

Yes. Japanese is one of the supported languages PyAI Agents supports live, alongside English, Korean, Mandarin and others. A Japanese agent uses Hear to transcribe, Speak to voice its replies and Omni to run each turn. Agents cost $0.08 per minute with no monthly fee, and signup includes $50 credit with no credit card.

Can a Japanese voice agent use keigo correctly?

The politeness level is set in the agent's prompt, so a PyAI Japanese agent can open in polite business Japanese, use respectful forms for the caller and humble forms for your company, and hold that register to the end. Review calls with Trace scoring to check the register stays consistent across real conversations.

How does the agent handle Japanese names and numbers?

Names in kanji can have several readings, so a good setup asks the caller to confirm the reading or fetches it from your records with a server tool. Phone numbers should be read in groups by area code. Test these cases in the PyAI sandbox, where test calls never bill.

Is a Japanese agent fast enough for natural turn taking?

PyAI measures about 390ms median voice to voice in its June 2026 US region benchmarks, with first audio around 53ms warm. That speed leaves room for short aizuchi responses and avoids the long silence that feels rude on a Japanese call. It places PyAI in the fastest class of voice agents.

Can a Japanese call move to a human operator?

Yes. PyAI supports live transfer with a whisper, so the operator hears a short summary of the caller's request before joining. The caller does not need to repeat details, which matters in Japanese service where repeating yourself feels like poor handling. Transfers work over a PyAI number or your own carrier.

Can developers build a Japanese agent on the API, or only use a prebuilt one?

Both. Teams building for their business configure a Japanese agent with instructions, knowledge and tools, while developers call the Omni API at $0.05 a minute to build their own in Japanese. The same Japanese speech, reasoning and voices back both paths, so you choose how much of the Japanese agent to build yourself.

Can a Japanese agent connect to Salesforce, HubSpot or Zendesk?

Yes, through tools. A Japanese agent's server tools call your HTTPS endpoint with signed requests, so it can read and write Salesforce, HubSpot, Zendesk or your own systems while the Japanese call is live. You map the fields, and your stack keeps control of what the Japanese agent is allowed to change.

Start building with PyAI voice

Spin up a sandbox key and put a natural voice on your calls and apps in minutes. No credit card, and $50 in free credit.

Get a sandbox key →