Skip to content
All posts

Alternatives17 min read·7 tools compared

Pipecat alternatives in 2026 for voice AI agents

Pipecat alternatives compared: managed voice agent platforms with telephony, open source frameworks, and voice APIs, with 2026 pricing. LiveKit Agents and TEN Framework are the open source peers, while PyAI Omni, Retell AI and Telnyx run managed agents with a phone line included.

Pipecat alternatives: voice AI agent frameworks and platforms

Why teams look for Pipecat alternatives

Pipecat is a favorite framework for building real time voice agents in Python, with a clean pipeline model and wide integrations. Teams move off it for the operations load, not the design.

  1. You own the operations

    Self hosting means you run, scale and monitor the agent, so GitHub reports such as a memory leak in one Kubernetes pipeline become your problem. Upkeep, not the first demo, is what teams underestimate.

  2. Assemble your own stack

    You wire in transcription, a model, text to speech and a transport, then keep each provider and its bill in sync.

  3. Turn detection tuning

    Smart Turn runs model inference at each turn boundary, adding cost, and voice activity thresholds need tuning so short replies like OK are not missed without raising false interruptions.

  4. Telephony is not built in

    Phone calls need Daily SIP at $0.003 to $0.02 a minute, PSTN at $0.018, or your own carrier, while LiveKit ships native SIP and managed platforms bundle the line.

Pipecat alternatives at a glance

Prices below come from each vendor pricing page on 20 October 2026, and the Telnyx and Vapi figures are their own published estimates.

Pipecat alternatives compared: built for, features, free option, price and telephony
ToolBuilt forFeaturesFree optionPrice (2026)Telephony
PyAITeams wanting a managed phone agent without the opsOmni hears, reasons and speaks in one session. Speak, Cast and Hear engines. OpenAI compatible. Carrier numbers included. WAV, PCM and G.711 output$50 credit, no credit cardSandbox keys never bill$0.05/min + $0.01 telephony$0.01 a minute telephony
LiveKit AgentsTeams keeping open source code but less operationsPython and Node SDKs, native SIP, and a managed cloud optionBuild plan, 1,000 minutesShip from $50/month, then $0.01/minNative SIP
VapiDevelopers wanting hosted orchestration with their own providersChoose the transcriber, model and voice, with Vapi running the servers and a dashboard$5 credit$0.05 plus providersCarrier you connect
Retell AITeams who would rather configure than code an agentA configured agent builder, with the model and voice added on top$10 creditAbout $0.11 a minuteBilled per component
TelnyxTeams wanting the carrier itself to run the agentNumbers, SIP trunk and agent through one carrier accountUsage basedNear $0.06, Telnyx estimateNative carrier
ElevenLabs AgentsStudios where how the agent sounds matters mostThe ElevenLabs voice library wrapped in a managed agent, telephony connected separatelyFree plan$0.08 a minute plus carrierSeparate carrier
TEN FrameworkEngineering teams that want to stay fully self hostedAn open source agent runtime you run on your own servers, providers wired inOpen source coreFree, you pay providersSelf wired SIP
Pipecat (for comparison)Engineers who assemble and run their own pipelineAn open source Python framework, bring your own providers, Daily SIP or PSTN on Pipecat CloudFree, open sourceCloud from $0.01/minFramework free, plus providers and hostingDaily SIP or PSTN at $0.018/min

Pipecat voice agent cost vs alternatives

Pipecat the framework is free, so the real bill is the providers you add plus hosting and engineering time. The chart prices 10,000 voice agent minutes a month, all in, on each route. The PyAI voice AI cost calculator runs the math for your own providers and volume.

PyAI vs the Pipecat route, 10,000 minutes a month

Save up to $470 a month on PyAI Omni

What 10,000 minutes of calls a month cost on each route, from vendor rates and vendor estimates. Bars show the monthly bill, and the right column compares each one with running Pipecat on Pipecat Cloud.

ToolMonthly cost, 10,000 minutesSaving vs Pipecat route
  • PyAI OmniTelephony includedSave up to $470

    $600 a month at $0.05/min + $0.01 telephony, with speech and reasoning inside the same rate

  • TelnyxAgent and carrierUp to $470 less

    About $600 a month near $0.06 a minute by the Telnyx estimate, its own carrier included

  • LiveKit AgentsOpen source, managed cloudDepends on models

    About $479 a month using the documented LiveKit example of $0.0479 a minute with low cost models

  • Pipecat routeCloud hosting, PSTN, providersBaseline

    $600 to $1,070 a month with agent-1x hosting at $0.01, Daily PSTN at $0.018, and providers priced from the Vapi estimate

  • Retell AIConfigured agent$30 to $500 more

    About $1,100 a month near $0.11 a minute once a model and voice sit on the $0.055 engine

  • TEN FrameworkOpen sourceNot comparable

    Free framework, priced by providers. No hosted TEN rate was published when checked, so the bill is whatever speech, model and carrier you choose

Rates checked 20 October 2026. The Pipecat route takes the Vapi estimate of $82 to $129 per 1,000 minutes, removes the $0.05 Vapi fee to price providers, then adds Pipecat Cloud and Daily PSTN.

Pipecat competitors reviewed

The seven picks split by how much of the Pipecat stack you want to keep running. PyAI, Retell AI and Telnyx are managed, Vapi hosts the agent while you keep your providers, LiveKit and TEN stay open source, and ElevenLabs is the speech quality pick.

PyAI

Built for managed phone agents with the carrier folded into one per minute rate

PyAI is voice infrastructure. Where Pipecat is a framework you assemble and run, the PyAI Omni engine hears, reasons and speaks in one managed session with phone numbers included. The Omni engine replaces the self assembled Pipecat stack for teams that want the agent without the operations. PyAI is not an orchestration framework: you do not write a frame pipeline, so engineers who want that control should stay on Pipecat or LiveKit, or use Omni as the managed path.

Omni costs $0.05 a minute plus $0.01 for the telephony line, metered by the minute. PyAI benchmarks put the median gap between a caller going quiet and the first agent audio at about 390 ms, with the first synthesized byte out in about 53 ms warm. Speak and Hear take OpenAI compatible requests, so moving the speech layer of a Pipecat build means little rework.

No G2 reviews exist for PyAI so far, and the Pipecat G2 page shows none either.

PyAI features

Omni
One session hears, reasons and speaks on a call, so no frame pipeline links three vendors.
Speak and Hear
Text to speech at $0.04 a minute and transcription at $0.001, both on the same API key.
No pipeline to run
Hosting, scaling and turn detection are managed, replacing the VAD tuning Pipecat teams do by hand.
OpenAI compatible
Standard request shapes, so existing client code needs few changes.

PyAI pricing

Omni

$0.05/min

Plus $0.01 phone line

Speak

$0.04/min

Text to speech

Credit

$50

No credit card

Omni bill at 10,000 call minutes a monthPer minute billing, carrier included
$600

A new account opens with $50 of free credit and no credit card, and calls on a sandbox key are never charged. Hear the voices on PyAI Speak.

PyAI pros and cons

Pros

  • Hosting, scaling and the phone line are run by PyAI, so no Pipecat process, container or SIP trunk is left on your side.
  • Omni bills $0.05 a minute plus $0.01 for telephony, with speech and reasoning inside the same per minute rate.
  • A median voice to voice reply of about 390 ms in PyAI benchmarks, well under the 800 ms point where calls start to feel stilted.
  • Hear accepts OpenAI compatible requests, so whisper-1 style transcription calls carry over, at $0.001 a minute.

Cons

  • PyAI is not an orchestration framework, so there is no frame pipeline or custom processor model of the kind Pipecat engineers write.
  • Transport choice is narrower than Pipecat, which runs over Daily WebRTC, websockets or Twilio, while Omni centers on managed calls.
  • Latency numbers come from internal PyAI benchmarks, and there is no G2 or Capterra profile yet to cross check them against.

PyAI reviews

The PyAI reviews tab is empty on purpose: no G2 profile exists yet, and this page will not fill it with made up quotes. A free sandbox key with $50 of credit and no credit card lets you route one Pipecat test agent through Omni and judge the calls yourself.

Choose PyAI if you run a Pipecat pipeline that works but spend more engineering time on the servers, scaling and carrier wiring around it than on the agent itself.

LiveKit Agents

Built for the closest open source framework with native telephony

LiveKit Agents is the framework most often set against Pipecat, and pipecat vs livekit is a common search on its own. LiveKit pairs Python and Node SDKs with native SIP and a managed cloud, so a team keeps open source code while handing off part of the operations. On G2 it holds 4.8 out of 5 from only 2 reviews.

Build costs nothing and includes 1,000 agent minutes. Ship is $50 a month plus $0.01 a minute, and LiveKit documents an example near $0.0479 a minute all in with low cost models. Community comparisons call LiveKit the easier pick for small teams that want less ops, while Pipecat wins on integrations.

LiveKit Agents features

Two SDKs
LiveKit Agents ships Python and Node SDKs, so a Node team is not held to Python first tooling.
Native SIP
LiveKit includes native SIP telephony, so phone calls reach the agent without separate carrier wiring.
Managed cloud
LiveKit runs a managed cloud beside the open source code, so part of the operations can be handed off.
Build plan
The LiveKit Build plan is free and includes 1,000 agent minutes for trialling a migrated flow.
Ship plan
The paid LiveKit Ship tier charges $50 a month and adds a cent for each agent minute.
Latency
One vendor affiliated test puts LiveKit at about 750 to 900 ms against 800 to 950 ms for Pipecat.
Against Pipecat's pain points: LiveKit Agents

LiveKit Agents keeps open source code while taking telephony and some operations off a Pipecat team.

  • Operations: LiveKit Cloud can host the agent, which community comparisons call the easier route for small teams that want less ops than Pipecat
  • Stack assembly: Speech and model vendors still bill separately on top of LiveKit Ship, so the provider mix stays yours to manage
  • Turn detection: Turn detection settings for LiveKit are not compared in the sources checked for this page, so test short replies like OK in a pilot
  • Telephony: Native SIP in LiveKit removes the Daily SIP or PSTN wiring a Pipecat phone agent needs
  • Node support: LiveKit offers a Node SDK alongside Python, the gap that Python first Pipecat leaves for Node teams
  • All-in cost: LiveKit's documented example lands near $0.0479 a minute all in with low cost models, plus $50 a month on Ship

LiveKit Agents pros and cons

Pros

  • Python and Node SDKs mean a team standardised on Node is not limited to the Python first tooling Pipecat offers.
  • Native SIP telephony lets phone calls reach the agent without the separate carrier wiring a Pipecat build usually needs.
  • The Build plan is free with 1,000 agent minutes, enough to trial a migrated Pipecat flow before paying for Ship.

Cons

  • Ship starts at $50 a month plus $0.01 a minute, and the speech and model vendors still bill you separately on top.
  • Latency sits close to Pipecat, about 750 to 900 ms against 800 to 950 ms in one vendor affiliated test, so speed alone rarely justifies a move.

LiveKit Agents reviews

LiveKit Agents holds 4.8 on G2 from 2 reviews. LiveKit Agents on G2 ↗

A reviewer highlights: "I really appreciate LiveKit's ease of integration and its scalability, which is extremely helpful for our use case. We rely heavily on its voice agents stack, along with the noise suppression and echo cancellation modules. It's great that LiveKit supports STT, TTS, LLM, custom LLMs, and SIP telephony integration." (Viren S., User, G2 September 2026)

Choose LiveKit Agents if you want to stay open source but gain native SIP and Node support.

Vapi

Built for teams that want hosted orchestration with their own providers

Vapi orchestrates the transcriber, model and voice you choose, so it keeps the provider freedom Pipecat users like while Vapi runs the servers. Vapi sits halfway between writing your own frame pipeline and buying a fully bundled agent.

The platform fee is $0.05 a minute, with providers billed at their own rates, and free accounts get $5 of credit. G2 lists an Agency plan at $500 a month and Startup at $999.98, and rates Vapi 4.2 out of 5 from 3 reviews.

The trade is a second bill: the $0.05 orchestration fee stacks on top of whatever the transcriber, model and voice providers charge, so a heavy call can cost more than a self hosted Pipecat agent you tuned yourself. Vapi fits teams that want to keep the provider mix they built in Pipecat without running the servers and scaling behind it.

Vapi features

Hosted orchestration
Vapi runs the servers and orchestrates the transcriber, model and voice you choose.
Provider freedom
Vapi keeps the mix and match provider choice that Pipecat users like.
Platform fee
Vapi charges $0.05 a minute, with providers billed at their own rates and $5 of credit on free accounts.
Listed plans
Vapi's higher tiers on G2 are Agency at $500 a month and Startup at $999.98.
Cost estimate
Vapi figures 1,000 minutes with providers at between $82 and $129.
Against Pipecat's pain points: Vapi

Vapi sits halfway between a Pipecat frame pipeline and a fully bundled agent.

  • Operations: Vapi hosts and runs the orchestration, so the scaling and monitoring work of a self hosted Pipecat agent moves to the vendor
  • Stack assembly: Provider invoices stay separate on Vapi, so finance still reconciles transcription, model and speech bills
  • Turn detection: Vapi turn detection controls are not described in the sources checked, so confirm interruption handling in a test call
  • Telephony: Carrier setup on Vapi is not detailed in the sources checked for this page, so price the phone line alongside the $0.05 fee
  • Node support: Vapi client SDKs are not listed in the sources checked, so a Node team should confirm client libraries first
  • All-in cost: Vapi estimates $82 to $129 for 1,000 minutes, against $60 for the same volume on Omni

Vapi pros and cons

Pros

  • Vapi runs the orchestration for $0.05 a minute while you keep choosing the transcriber, model and voice, close to the Pipecat mix and match style.
  • Easy setup and integrations are the themes G2 reviewers praise most, which suits teams leaving a hand built pipeline.

Cons

  • The Vapi estimate puts 1,000 minutes at $82 to $129 once providers are added, against $60 for the same volume on Omni.
  • Provider invoices stay separate, so finance still reconciles transcription, model and speech bills as it did with a self run Pipecat stack.
  • G2 reviewers flag a learning curve and interface complexity, and the 4.2 score rests on only 3 reviews so far.

Vapi reviews

Vapi holds 4.2 on G2 from 3 reviews. Vapi on G2 ↗

A reviewer highlights: "Vapi AI is very easy to use and the integration is straightforward. The initial setup was very easy, which made the whole process smooth." (Bappy R., Small-Business, G2 May 2026)

On pricing: "Some limits as to the functionality, but mostly it is a superior and affordable product." (Steve M., Small-Business, G2 Mar 2025)

Choose Vapi if you like mixing providers in Pipecat but no longer want to host the agent.

Retell AI

Built for a configured voice agent with a large G2 review base

Retell AI is a managed agent platform for teams that would rather configure a voice agent than code one. Next to Pipecat there is no Python pipeline to maintain, and reviewers lean on ease of use as the main draw.

Retell prices its engine per minute and adds the model and voice on top, which puts a typical call near $0.11. G2 lists pay as you go at $0.07 a minute and an Enterprise plan at $8,000, and shows a 4.8 rating for Retell.

The trade is control: a Pipecat team moves from a frame pipeline it can edit to a configured agent it tunes through settings, which is faster to launch but harder to customize at the audio level. Retell AI fits teams that would rather pay a per minute rate for a ready made agent than keep maintaining Python code and servers of their own.

Retell AI features

Configured agents
Retell AI is a managed platform where a voice agent is configured rather than coded.
Engine rate
Retell's voice engine is $0.055 a minute with no platform fee, and a typical call lands near $0.11 with a model and voice.
Plans on G2
Retell's G2 listing shows $0.07 a minute on pay as you go and $8,000 for Enterprise.
Starter credit
A $10 Retell signup credit covers a first pilot of one migrated call flow.
Against Pipecat's pain points: Retell AI

Retell AI removes the Python pipeline entirely, at close to double the Omni rate.

  • Operations: Retell runs the platform, so no Pipecat style servers, scaling or upgrades sit with your engineers
  • Stack assembly: Retell adds the model and voice to its engine rate, so one platform prices the parts a Pipecat build wires by hand
  • Turn detection: G2 reviewers name occasional poor understanding of callers among Retell complaints, so test turn taking on real calls
  • Telephony: Retell telephony terms are not covered in this page's Retell sources, so check carrier options before porting numbers
  • Node support: Retell is configured in a console rather than coded, so the Python versus Node question largely falls away
  • All-in cost: Near $0.11 a minute all in, Retell runs close to double what Omni charges at $0.05 a minute plus $0.01 telephony, with 4.8 on G2 from 2,639 reviews

Retell AI pros and cons

Pros

  • Holds 4.8 out of 5 on G2 across 2,639 reviews, far more than the handful each other tool in this comparison holds.
  • The voice engine is $0.055 a minute with no platform fee, which keeps the base rate easy to read.
  • G2 reviewers single out ease of use and a simple interface, a clear contrast with writing Pipecat frame processors by hand.
  • New accounts start with $10 of credit, enough to pilot one Pipecat call flow before committing.

Cons

  • With a model and voice added, the all in rate lands near $0.11 a minute, close to double what Omni charges at $0.05 a minute plus $0.01 telephony.
  • Missing features, cost and occasional poor understanding of callers are the complaints that recur in G2 reviews.

Retell AI reviews

Retell AI holds 4.8 on G2 from 2,639 reviews. Retell AI on G2 ↗

A reviewer highlights: "Retell AI is easy to use, highly customizable, and makes it simple to build realistic AI voice agents for lead qualification, customer support and appointment booking." (Verified user, Small-Business, G2 2026)

The same reviewer flags: "The main downside is the learning curve for advanced workflows and the time required to thoroughly test conversation flows so they feel consistently natural." (Verified user, Small-Business, G2 2026)

On pricing: "The pricing can also become expensive when scaling or doing many test calls during development." (Verified user in computer software, G2 Jun 2026)

Choose Retell AI if you want a configured voice product with thousands of G2 reviews behind it.

Telnyx Voice AI

Built for teams that want the agent run by the carrier itself

Telnyx is a telecom carrier that also runs voice agents, so the numbers, the SIP trunk and the agent bill through a single Telnyx account. For a Pipecat team, that removes the separate carrier contract a self hosted agent needs.

Telnyx puts a call near $0.06 a minute with speech, a model and the carrier included, about level with PyAI Omni. Tier limits were not confirmed on 20 October 2026, so check concurrency needs with Telnyx before moving heavy traffic.

The trade is lock in: numbers, trunk and agent all live with one carrier, so a later move means unwinding the whole account rather than swapping a single provider. Telnyx Voice AI fits Pipecat teams that are happy to standardise on one carrier and want a single invoice instead of a separate trunk contract plus a self hosted agent.

Telnyx Voice AI features

Carrier and agent
Telnyx owns the carrier network and hosts the voice agent alongside it.
One invoice
Telnyx bills numbers, the SIP trunk and the agent together, removing a separate carrier contract.
All in estimate
Telnyx quotes roughly $0.06 a minute for a call that already includes speech, model and carrier.
Configuration
Telnyx agents are configured rather than coded, with no direct match for custom frame processing.
Against Pipecat's pain points: Telnyx Voice AI

Telnyx folds the carrier and the agent into one bill, about level with PyAI Omni.

  • Operations: Telnyx hosts the agent on its own network, so the self hosting upkeep of Pipecat goes away
  • Stack assembly: Speech, a model and the carrier come inside the Telnyx estimate, so there is no provider list to keep in sync
  • Turn detection: Turn detection behavior on Telnyx is not described in the sources checked, so test interruptions before moving traffic
  • Telephony: Numbers and SIP sit on the same Telnyx account as the agent, filling the telephony gap Pipecat leaves open
  • Node support: Telnyx relies on configuration, so the custom Python frame processing a Pipecat team uses has no direct equivalent
  • All-in cost: Telnyx estimates near $0.06 a minute (Telnyx estimate), though tier limits were not confirmed on 20 October 2026

Telnyx Voice AI pros and cons

Pros

  • Telnyx is a carrier as well as an agent platform, so numbers, SIP and the agent sit on one account and one invoice.
  • The Telnyx estimate lands near $0.06 a minute (Telnyx estimate), roughly level with PyAI Omni at $0.05/min + $0.01 telephony and below the Pipecat route once paid providers are added.

Cons

  • Configuration replaces code, so the custom frame processing a Pipecat team relies on has no direct equivalent on Telnyx.
  • Leaving Telnyx later is harder than leaving Pipecat, because the phone numbers, SIP trunk and agent all have to move off one carrier account together.

Telnyx Voice AI reviews

We looked for attributed Telnyx Voice AI reviews that name pricing and the product and, as of 20 October 2026, found none on G2 or Capterra, so there is nothing to quote honestly. Judge Telnyx Voice AI on a short trial and a reference call rather than on a rating.

Choose Telnyx Voice AI if you want your phone numbers and the agent under one carrier account.

ElevenLabs Agents

Built for speech quality first on a managed agent

ElevenLabs Agents puts the ElevenLabs voice library inside a managed agent, which suits Pipecat users whose main complaint was how the agent sounded rather than hosting.

Agent minutes cost $0.08 before telephony, which you connect separately. ElevenLabs' pricing page lists plans from a free tier and Starter at $6 up to Business at $990 a month, and rates ElevenLabs 4.5 out of 5 across 1,260 reviews.

The trade is cost and scope: at $0.08 a minute before telephony, ElevenLabs Agents sits above the managed phone routes, and the draw is the voice rather than call handling or carrier features. ElevenLabs Agents fits Pipecat teams whose callers judged the old agent on how it sounded, and who will connect telephony themselves to keep that voice quality.

ElevenLabs Agents features

Voice library
ElevenLabs Agents gives a hosted agent direct access to the full ElevenLabs voice catalog.
Agent rate
ElevenLabs Agents minutes cost $0.08 before telephony, which is connected separately.
Plan range
ElevenLabs pricing climbs from a free plan and $6 Starter to $990 a month on Business.
Voice reviews
G2 rates ElevenLabs 4.5 out of 5 across 1,260 reviews, with voice quality and speed praised most.
Capterra standing
ElevenLabs scores 4.7 on Capterra across 25 reviews, with voice choice a common compliment.
Against Pipecat's pain points: ElevenLabs Agents

ElevenLabs Agents fits Pipecat users whose main complaint was how the agent sounded.

  • Operations: ElevenLabs manages the agent runtime, so hosting a Pipecat pipeline is no longer your job
  • Stack assembly: Voice and agent come from ElevenLabs, with only the phone carrier added separately
  • Turn detection: ElevenLabs turn detection is not covered in the sources checked, and reviewers flag pronunciation slips to test for
  • Telephony: ElevenLabs Agents connects telephony separately, so a carrier contract remains, as with Pipecat
  • Node support: ElevenLabs Agents SDK coverage is not listed in the sources checked for this page
  • All-in cost: At $0.08 a minute before a carrier, 10,000 ElevenLabs minutes cost $800 plus telephony against $600 on Omni

ElevenLabs Agents pros and cons

Pros

  • Voice quality and speed are the themes G2 reviewers praise most, making it the speech led pick on this list.
  • Capterra users rate it 4.7 from 25 reviews and point to the large voice selection agents can draw on.

Cons

  • Agents bill $0.08 a minute before a carrier, so 10,000 minutes costs $800 plus telephony against $600 on Omni.
  • Reviewers flag pricing issues and pronunciation slips, and Capterra users say monthly credits run out fast.
  • ElevenLabs Agents competes on voice sound, not on routing or carrier tooling, so phone heavy teams should check call handling needs during a trial.
  • G2 reviewers also list missing features for ElevenLabs, so confirm that each behavior the old Pipecat agent relied on exists before switching.

ElevenLabs Agents reviews

ElevenLabs Agents holds 4.5 on G2 from 1,260 reviews. ElevenLabs Agents on G2 ↗

A reviewer highlights: "The absolute best part is just how genuinely human the voices sound: the natural pauses, the breathing, and the way emphasis shifts." (Pradumya K., Enterprise, G2 Oct 2026)

Another flags: "The main pain point is how it handles dense legal terminology, citations and Latin maxims. The model frequently stumbles over citations." (Shreyansh P., Small-Business, G2 Oct 2026)

On pricing: "The best part about ElevenLabs is the free credit thing they have." (Rashi R., Small-Business, G2 Oct 2026)

Choose ElevenLabs Agents if caller facing voice quality matters to you more than the cost per minute.

TEN Framework

Built for a second open source framework to self host

TEN Framework is an open source agent runtime that 2026 roundups list beside Pipecat, LiveKit, Vocode and Bolna. Like Pipecat, it runs on servers you control.

No hosted TEN price was found on 20 October 2026. The bill is the speech, model and telephony providers you add, plus servers and engineering time, the same cost shape as Pipecat.

The trade is maturity: TEN Framework is newer than Pipecat and LiveKit, so its integration catalog and community are smaller, and a team still takes on the servers, scaling and provider wiring it already runs. TEN Framework fits engineering teams that want to stay self hosted and open source but are willing to evaluate a second runtime against the one they already know.

TEN Framework features

Agent runtime
TEN Framework is an open source agent runtime listed beside Pipecat, LiveKit, Vocode and Bolna in 2026 roundups.
Self hosted
TEN runs on servers you control, keeping call audio and transcripts inside your network.
Apache 2.0 licensed
TEN Framework is released under Apache 2.0, so the license cost of leaving Pipecat is zero.
Provider bills
No hosted TEN price was found on 20 October 2026, so the bill is speech, model and telephony providers plus servers.
Against Pipecat's pain points: TEN Framework

TEN Framework swaps one open source framework for another, with the same cost shape as Pipecat.

  • Operations: Hosting, scaling and monitoring stay with your engineers on TEN, the same burden as Pipecat
  • Stack assembly: TEN still needs speech, model and telephony providers added and billed one by one
  • Turn detection: Turn detection and voice activity tuning remain your job on TEN, the work Pipecat users report when short replies get missed
  • Telephony: A TEN phone agent still needs a carrier and SIP setup, the wiring gap that pushes teams away from Pipecat
  • Node support: TEN client SDKs are not stated in the sources checked, so a Node team should check the repository first
  • All-in cost: TEN has no hosted price, so cost equals providers, servers and engineering time, with nothing saved over Pipecat

TEN Framework pros and cons

Pros

  • The core is Apache 2.0 licensed and open source, so the license cost of leaving Pipecat for TEN is zero.
  • Self hosting keeps call audio and transcripts inside your own network, which matters for teams with strict data rules.
  • TEN Framework lets a self hosted team benchmark a second open source runtime against Pipecat without a vendor contract or a hosted fee to negotiate.

Cons

  • A phone agent still needs a carrier and SIP setup, the same wiring gap that pushes many teams away from Pipecat in the first place.
  • Switching from Pipecat to TEN swaps one framework for another, so hosting, scaling and monitoring stay with your engineers.
  • Turn detection and voice activity tuning remain your job, the same work Pipecat users report when short replies like OK get missed.

TEN Framework reviews

A 20 October 2026 search of G2 and Capterra turned up no attributed TEN Framework user reviews covering pricing or the product, so there is nothing to quote honestly. Judge TEN Framework on a self hosted trial against your current runtime rather than on a rating.

Choose TEN Framework if you want to keep self hosting but try a different open source runtime.

Pipecat alternatives by job and use case

The right swap depends on how much of the stack you want to own: a managed agent, an open source framework, or the speech layer only.

Which tool fits which job

Pipecat swap options matched to each job
JobPickWhy
Managed phone agentsPyAI, TelnyxTelephony built in, per minute
Open source frameworkLiveKit, TENSelf host, full control
Provider control, managedVapiBring your own keys
Finished voice productRetell AIBuilder and analytics
Best speech qualityElevenLabs AgentsVoice quality first
Speech layer onlyPyAI Speak and HearPlug into any framework

Frameworks vs managed agents

Self hosted frameworks against managed voice agents, with PyAI shown on its own
Frameworks (Pipecat, LiveKit, TEN)Managed agents (Retell, Telnyx)PyAI
You runHosting, scaling, monitoringThe vendor runs itPyAI runs it for you
TelephonyWire in a carrierIncluded or nativeBuilt in at $0.01 a minute
ControlFull pipeline controlConfigured, not codedConfigured, with API access
Turn detectionYou tune VAD and Smart TurnHandled by the vendorHandled by PyAI
Best forEngineers wanting controlTeams wanting a productTeams wanting a managed agent

Pricing models compared

Pricing models
ModelWho uses itWhat to watch
Per minute all inPyAI, TelnyxTelephony and add ons
Hosting plus providersPipecat Cloud, LiveKitEach provider billed apart
Engine plus componentsRetell, VapiCosts stack by part
Open sourcePipecat, TENServers and scaling stay with you

Free and open source Pipecat alternatives

LiveKit Agents and TEN Framework are the open source frameworks closest to Pipecat, and both can run on your own servers for data control. LiveKit adds native SIP and a managed cloud with a free Build plan, while TEN gives a second runtime to evaluate. Open source drops the license fee but keeps the servers, provider bills and engineering time.

Whichever route you take, test your busiest call flow on the shortlist before moving, since turn detection and latency behave differently on a live call than in a demo.

When Pipecat is still the right pick

Pipecat remains a strong choice for engineering teams that want full control of a Python voice pipeline, custom frame processing, and the freedom to swap any provider. Pipecat's integrations and pipeline model are well liked. Teams that want to drop the hosting, scaling and turn detection work, or ship a phone agent fast, gain the most from a managed platform.

How to switch from Pipecat in 4 steps

Most teams pilot the managed path on one call reason first, where the operations saving shows up fastest.

Step 1 of 4

Map your agent flow

List the call reasons your Pipecat agent handles, the providers it calls and the monthly minutes.

Step 2 of 4

Note prompts and providers

Collect the prompts, knowledge content and provider settings before pointing anything new.

Step 3 of 4

Pilot the busiest reason

Recreate the Pipecat flow with the most traffic on the managed agent and compare live calls in parallel.

Step 4 of 4

Move traffic in stages

Shift a share of calls, compare latency and outcomes, then move the rest.

Which Pipecat alternative to pick

Picking a Pipecat replacement comes down to how much of the stack you want to keep running. LiveKit Agents and TEN Framework keep you on open source, and Vapi hosts the agent while you keep choosing providers. For a phone agent with nothing to host, PyAI Omni charges $0.05/min + $0.01 telephony, and Telnyx estimates a similar $0.06. A sandbox key costs nothing, comes with $50 in credit and needs no credit card.

Get a sandbox key →

More voice agent comparisons

Pipecat alternatives FAQs

Common questions from teams weighing Pipecat.

What is a good Pipecat alternative?

LiveKit Agents is the closest framework, and PyAI Omni is the closest managed swap. LiveKit keeps your code open source and adds native SIP. For a phone agent with nothing to host, PyAI Omni costs $0.05/min + $0.01 telephony, Telnyx estimates near $0.06 a minute, and Retell AI lands near $0.11.

Is Pipecat free and open source?

Yes. Pipecat is a BSD-2 licensed Python framework from Daily, free to run. You pay for the speech, model and telephony providers you wire in, and for hosting. Pipecat Cloud charges from $0.01 a minute for agent hosting on top of those provider costs.

How much does a Pipecat voice agent cost?

The framework is free, the providers are not. Pipecat Cloud hosting runs $0.01 to $0.03 a minute and Daily PSTN adds $0.018. Pricing the speech and model providers from the Vapi published estimate, a Pipecat phone agent lands between about $0.06 and $0.11/min. PyAI Omni folds speech, reasoning and telephony into $0.05 a minute plus $0.01 telephony.

Pipecat vs LiveKit: which is better?

Both are strong open source frameworks. Pipecat offers a Python frame pipeline with wide integrations, while LiveKit adds Node SDKs, native SIP and a managed cloud. One vendor affiliated test measured Pipecat at about 800 to 950 ms and LiveKit at 750 to 900 ms, so telephony and ops load usually decide more than speed.

What is an open source alternative to Pipecat?

LiveKit Agents and TEN Framework. LiveKit Agents is open source with a free Build plan of 1,000 agent minutes, and TEN Framework is a free runtime you host yourself. PyAI is not a framework, yet a sandbox key with $50 of credit and no credit card lets you test its speech and phone layer under a Pipecat agent.

Do I need to run my own servers with Pipecat?

Yes, unless you use managed hosting. Self hosted Pipecat leaves running, scaling and monitoring the agent to your team, along with voice activity and turn detection tuning. Pipecat Cloud takes over the hosting from $0.01 a minute, and a managed tool such as PyAI Omni also removes the provider wiring and the carrier setup.

Test PyAI on your own audio and calls.

Get a sandbox key and hear the output in under a minute. Sandbox keys are free, with $50 in starter credit and no credit card required. Speak is $0.04/min, Cast $0.02/min, Hear $0.001/min and Omni $0.05/min + $0.01 telephony.