Model
FreeApache 2.0
open weights
commercial OK
Hosted API
Nonefirst-party
third-party only
per character
Real cost
GPUand ops
consumer GPU
self-run
Third-party
fal.aiand others
own rates
varies
Dia is an open, expressive text to speech model you run yourself. Because it is model-first, the cost is infrastructure, not a per-minute rate, and there is no built-in telephony or concurrency management.
Nari Labs Dia pricing by cost item: free model, real costs
Dia has no price card because it is an open model, not a service. The Apache 2.0 license costs nothing. The items below are where the spend actually lands.
Dia ships as open weights under Apache 2.0, which allows commercial use at no licensing fee. The Apache 2.0 license is a real advantage over non-commercial research models, since a product can use it without renegotiating terms.
Nari Labs runs no hosted API with a published price, so putting Dia into production means either self-hosting the weights or going through a third-party host that wraps its own rate around them.
The Nari Labs Dia GitHub README (checked October 2026) describes Dia running on a consumer GPU with roughly 10GB of memory, so the hardware bar is lower than for large models, per that README.
The fal.ai pricing page (checked October 2026) exposes Dia at fal.ai's own rate, charged per 1,000 characters, so a team that does not self-host still pays a usage rate, just not one Nari Labs sets.
Dia is a model-first project from a small team, so expect to supply your own operations, monitoring, and scaling rather than the support and SLA a managed product would include.
Because there is no first-party per-minute price, the real cost depends on your GPU and team, or a third-party host rate.
How much Nari Labs Dia really costs to run
The model is free, but running Dia means paying for infrastructure and engineering, or a third-party host. GPU time, engineering hours, and hosting fees below are where Dia's real cost lands.
Which teams the Nari Labs Dia product fits, by job and use case
Dia fits developers who want an open, expressive text to speech model to run and adapt. The notes below sort which teams should self-host Dia and which are better served by a hosted per-minute API.
Builders who want to self-host an expressive voice with commercial rights, and who value owning and tuning the model over buying a managed service around it.
Groups that already have the GPU capacity and engineering to deploy and operate a model, for whom Dia's low hardware bar makes self-hosting genuinely cheap at the margin.
Builders who want to ship text to speech without standing up and maintaining GPUs will get there faster on a hosted, per-minute API that handles scaling and support.
Call use cases need phone-ready audio formats and managed concurrency that a raw model does not provide, so a voice agent needs an infrastructure layer on top of Dia rather than the model alone.
Dia is strongest for developers who want to self-host an open voice model. For a hosted, per-minute layer with phone-ready audio and no GPU to manage, PyAI Speak fits better.
Nari Labs Dia vs PyAI: hosted per minute
Dia has no first-party per-minute price. Dia cost is GPU and engineering, or a third-party host rate. The PyAI Speak figure prices the same minutes at the hosted $0.04 rate.
Nari Labs Dia pricing: the fine print to watch
- GPU cost: free model, but you pay for the GPU and operations to run it.
- No SLA: there is no first-party hosted product, so uptime and support are on you.
- Third-party rates vary: hosts like fal.ai price per 1,000 characters, so convert carefully.
- No telephony formats: the model has no built-in phone audio or concurrency management.
- Research-grade: a small-team project, so expect to add your own production tooling.
- Model confusion: some pages mix Dia with a different hosted model, so confirm you are pricing Dia.
The main thing to confirm is whether you can run and maintain the model yourself, since the headline free weights do not include hosting, SLA, or telephony.
Nari Labs Dia reviews: what users say
We looked for real, attributed user reviews of Nari Labs Dia that mention pricing and the product. As of October 2026 we found no public user reviews on the sources below, so there is nothing to quote honestly. Nari Labs Dia is an open model, so feedback lives on GitHub and forums rather than review sites.
No public user reviews found
Evaluate Dia by running the open weights on a test GPU and reading GitHub issues, since no verifiable user reviews exist yet.
Nari Labs Dia vs PyAI: cost and effort compared
Dia is a free open model you run yourself. PyAI is a hosted, per-minute voice layer. The table sets Dia's GPUs, license and formats against PyAI's hosted Speak and Cast.
| Dia by Nari Labs | PyAI | |
|---|---|---|
| Pricing model | Free model, you run it | Hosted, billed per generated minute |
| Per minute rate | None from Nari Labs | ✓ Speak $0.04/min, Cast $0.02/min |
| License | ✓ Apache 2.0, commercial | Commercial, hosted terms |
| Hosting | Self-host on your GPUs | ✓ Hosted, no infrastructure |
| Multi-speaker dialogue | ✓ Multi-speaker output | One voice per Cast render |
| Setup | Engineering effort | ✓ Sandbox key in minutes |
| Output for phone systems | You build it | ✓ WAV, PCM or G.711 |
| Speech to text and agents | TTS model only | ✓ Hear, Agents, and Omni too |
| Cost predictability | Varies with compute | ✓ Flat published per minute |
Choose Dia if you want
- An open, expressive model to run yourself
- Apache 2.0 with commercial use allowed
- Control of weights, hardware, and latency on your own GPUs
Choose PyAI if you want
- Hosted text to speech at $0.04 a minute
- No GPUs to manage, phone-ready audio
- Speech to text and voice agents on one bill
Dia wins when you want an open, expressive model to run and adapt on your own GPUs. PyAI wins when you want hosted, per-minute speech with phone-ready audio and no infrastructure to manage. Dia versus PyAI comes down to owning the model and its GPUs or paying per minute for hosted speech.
Nari Labs Dia cost by volume and scenario
Because Dia has no first-party per-minute price, cost scales with GPU use or a third-party host rate. The table walks Dia from a one GPU prototype to scaled production hosting.
| Scenario | What you need | Dia cost driver | Watch out for |
|---|---|---|---|
| Prototype | One GPU | Compute time | Setup effort |
| Internal use | Steady GPUs | Ongoing GPU + ops | No SLA |
| Production | Scaled hosting | Infra or third-party host | No telephony formats |
Hosted per-minute text to speech
For teams that would rather not run GPUs, PyAI Speak and Cast publish a per-minute price. Dia has no first-party rate, so the table shows PyAI costs for context.
| Minutes a month | Dia on your GPUs | PyAI Speak | PyAI Cast |
|---|---|---|---|
| 500 | GPU cost | $20 | $10 |
| 2,000 | GPU cost | $80 | $40 |
| 10,000 | GPU cost | $400 | $200 |
| 20,000 | GPU cost | $800 | $400 |
Dia has no first-party per-minute rate. Dia cost comes from GPU time and engineering. The PyAI Speak and Cast columns are minutes times $0.04 and $0.02, with nothing to host.
Nari Labs Dia pricing: the bottom line
Nari Labs Dia is open weights, free to self-host under Apache 2.0 with commercial use allowed, and has no first-party hosted price, so the real cost is GPU and engineering or a third-party host rate. Dia is an expressive, model-first text to speech project. PyAI is hosted and priced per minute, Speak at $0.04/min and Cast at $0.02/min, with $50 of free credit and no credit card.
PyAI is not an open model you run or modify yourself, and it is not research-grade tooling. PyAI is hosted voice infrastructure priced per minute, with phone-ready audio and speech to text on the same bill.
Nari Labs Dia pricing FAQs
The questions teams ask most before choosing Nari Labs Dia.
How much does Nari Labs Dia cost?
The Dia model is open weights, free to download and self-host under an Apache 2.0 license, with no fee for the model and commercial use allowed. Nari Labs offers no first-party hosted price, so the real cost is the GPU and engineering to run it, or a third-party host's rate.
Is Nari Labs Dia free for commercial use?
Yes. Unlike some research models, Dia ships under Apache 2.0, which permits commercial use at no licensing fee. The cost is the hardware and engineering to self-host, since Nari Labs does not run a first-party hosted API with a published rate.
Does Nari Labs host Dia?
No first-party hosted Dia API with a published price exists. Third-party hosts such as fal.ai and others expose Dia with their own rates, often per 1,000 characters or by credits. To run it yourself you self-host the weights on a GPU.
What does Nari Labs Dia do?
Dia is an open weights text to speech model from Nari Labs that generates expressive, multi-speaker speech and ships under an Apache 2.0 license. Dia is a model-first, research-grade project rather than a managed product, so it has no built-in telephony formats, concurrency management, or per-minute billing.
What do reviews say about Nari Labs Dia?
We found no public user reviews of Nari Labs Dia on G2 or Capterra as of October 2026, so this page shows no rating for Dia. Feedback on Dia lives in GitHub issues and community forums, where developers post setup questions and test results rather than scored reviews of a managed product.
What is a hosted per-minute alternative to Dia?
PyAI is hosted and priced per minute. New accounts get $50 of free credit with no credit card, then Speak text to speech bills $0.04/min and Cast bills $0.02/min. PyAI removes the GPU and ops burden of self-hosting an open model and adds phone-ready audio.
More Nari Labs comparisons and guides
Price PyAI against your own volume.
Per minute pricing with no plan fee and no credits to burn. Speak is $0.04/min, Cast $0.02/min, Hear $0.001/min and Omni $0.05/min + $0.01 telephony, with $50 in starter credit and no credit card.
